Rated inlet pressure: 0.7Mpa(0.6Mpa-1.0Mpa allowed)
Rated inlet temperature: 10℃-30℃(2℃-40℃ allowed)
Dew point of finished gas: -40℃(customized below -40℃)
Ambient temperature: ≤45℃
Pressure damage: ≤0.02Mpa
Intake oil content: ≤0.1mg/m3
Average regeneration gas consumption: 8-14%
Adsorbent: activated alumina+molecular sieve
Control mode: fully electronic programmable time control(dew point control is optional)
Availability: | |
---|---|
Quantity: | |
Heatless Regerenerated Adsorption Air Dryer advantage:
1. Reduce system complexity: No separate cooling system is required to pre cool high-temperature compressed air, simplifying the air handling process.
2. Cost savings: Due to reduced energy consumption and cost minimization, operating costs are lowered
Maintenance requirements.
3. Improve air quality: Provide continuous dry compressed air to reduce the risk of moisture related issues in pneumatic tools and equipment.
4. Improve system efficiency: By directly and effectively processing high-temperature air, the overall efficiency of the compressed air system has been optimized.
Technical Data of Desiccant Air Dryer (HeatlessType)
Model | Inlet Temperature | Air Flow (m3/min) | Working Pressure(Mpa) | Loss of Pressure(Mpa) | Pipe Diameter | Desiccant Weight (KG) | Dimension (mm) | N.W.(KG) | ||
L | W | H | ||||||||
P-1 | 0-45℃ | 1.9 | 0.6--1.0 | ≤0.02 | DN25 | 25 | 800 | 450 | 1450 | 230 |
P-2 | 0-45℃ | 2.6 | 0.6--1.0 | ≤0.02 | DN25 | 50 | 800 | 450 | 1450 | 320 |
P-3 | 0-45℃ | 3.6 | 0.6--1.0 | ≤0.02 | DN40 | 82 | 1000 | 500 | 1680 | 450 |
P-5 | 0-45℃ | 5 | 0.6-1.0 | ≤0.02 | DN50 | 98 | 1000 | 500 | 1680 | 500 |
P-6 | 0-45℃ | 6.5 | 0.6--1.0 | ≤0.02 | DN50 | 114 | 1000 | 800 | 2060 | 600 |
P-10 | 0-45℃ | 10 | 0.6--1.0 | ≤0.02 | DN65 | 170 | 1020 | 800 | 2060 | 800 |
P-13 | 0-45℃ | 13 | 0.6--1.0 | ≤0.02 | DN65 | 235 | 1050 | 850 | 2180 | 950 |
P-15 | 0-45℃ | 15 | 0.6--1.0 | ≤0.02 | DN80 | 285 | 1050 | 850 | 2180 | 1000 |
P-20 | 0-45℃ | 20 | 0.6--1.0 | ≤0.02 | DN80 | 365 | 1100 | 900 | 2300 | 1000 |
P-25 | 0-45℃ | 26 | 0.6--1.0 | ≤0.02 | DN80 | 427 | 1250 | 950 | 2300 | 1200 |
P-30 | 0-45℃ | 30 | 0.6--1.0 | ≤0.02 | DN100 | 533 | 1350 | 1000 | 2350 | 1300 |
P-40 | 0-45℃ | 40 | 0.6--1.0 | ≤0.02 | DN100 | 782 | 1500 | 1000 | 2650 | 1500 |
P-50 | 0-45℃ | 50 | 0.6--1.0 | ≤0.02 | DN100 | 933 | 1800 | 1100 | 2500 | 1550 |
P-60 | 0-45℃ | 65 | 0.6--1.0 | ≤0.02 | DN125 | 1084 | 1800 | 1100 | 2500 | 1800 |
P-80 | 0-45℃ | 80 | 0.6--1.0 | ≤0.02 | DN125 | 1443 | 2300 | 1200 | 2550 | 2500 |
P-100 | 0-45℃ | 100 | 0.6--1.0 | ≤0.02 | DN125 | 1865 | 3000 | 1300 | 2800 | 3000 |
Heatless Regerenerated Adsorption Air Dryer advantage:
1. Reduce system complexity: No separate cooling system is required to pre cool high-temperature compressed air, simplifying the air handling process.
2. Cost savings: Due to reduced energy consumption and cost minimization, operating costs are lowered
Maintenance requirements.
3. Improve air quality: Provide continuous dry compressed air to reduce the risk of moisture related issues in pneumatic tools and equipment.
4. Improve system efficiency: By directly and effectively processing high-temperature air, the overall efficiency of the compressed air system has been optimized.
Technical Data of Desiccant Air Dryer (HeatlessType)
Model | Inlet Temperature | Air Flow (m3/min) | Working Pressure(Mpa) | Loss of Pressure(Mpa) | Pipe Diameter | Desiccant Weight (KG) | Dimension (mm) | N.W.(KG) | ||
L | W | H | ||||||||
P-1 | 0-45℃ | 1.9 | 0.6--1.0 | ≤0.02 | DN25 | 25 | 800 | 450 | 1450 | 230 |
P-2 | 0-45℃ | 2.6 | 0.6--1.0 | ≤0.02 | DN25 | 50 | 800 | 450 | 1450 | 320 |
P-3 | 0-45℃ | 3.6 | 0.6--1.0 | ≤0.02 | DN40 | 82 | 1000 | 500 | 1680 | 450 |
P-5 | 0-45℃ | 5 | 0.6-1.0 | ≤0.02 | DN50 | 98 | 1000 | 500 | 1680 | 500 |
P-6 | 0-45℃ | 6.5 | 0.6--1.0 | ≤0.02 | DN50 | 114 | 1000 | 800 | 2060 | 600 |
P-10 | 0-45℃ | 10 | 0.6--1.0 | ≤0.02 | DN65 | 170 | 1020 | 800 | 2060 | 800 |
P-13 | 0-45℃ | 13 | 0.6--1.0 | ≤0.02 | DN65 | 235 | 1050 | 850 | 2180 | 950 |
P-15 | 0-45℃ | 15 | 0.6--1.0 | ≤0.02 | DN80 | 285 | 1050 | 850 | 2180 | 1000 |
P-20 | 0-45℃ | 20 | 0.6--1.0 | ≤0.02 | DN80 | 365 | 1100 | 900 | 2300 | 1000 |
P-25 | 0-45℃ | 26 | 0.6--1.0 | ≤0.02 | DN80 | 427 | 1250 | 950 | 2300 | 1200 |
P-30 | 0-45℃ | 30 | 0.6--1.0 | ≤0.02 | DN100 | 533 | 1350 | 1000 | 2350 | 1300 |
P-40 | 0-45℃ | 40 | 0.6--1.0 | ≤0.02 | DN100 | 782 | 1500 | 1000 | 2650 | 1500 |
P-50 | 0-45℃ | 50 | 0.6--1.0 | ≤0.02 | DN100 | 933 | 1800 | 1100 | 2500 | 1550 |
P-60 | 0-45℃ | 65 | 0.6--1.0 | ≤0.02 | DN125 | 1084 | 1800 | 1100 | 2500 | 1800 |
P-80 | 0-45℃ | 80 | 0.6--1.0 | ≤0.02 | DN125 | 1443 | 2300 | 1200 | 2550 | 2500 |
P-100 | 0-45℃ | 100 | 0.6--1.0 | ≤0.02 | DN125 | 1865 | 3000 | 1300 | 2800 | 3000 |